VOOPOO Drag 2 Kit is the updated version of the original VOOPOO Drag kit, which consists of the Drag 2 box mod and the brand new Uforce T2 tank. In addition to its high-end technical design, which is very streamlined with a colorful resin panel on one side, the mod also looks modern. On the control face, you will see a crystal clear OLED display with a menu that displays the current battery level, mode, resistance or voltage, and wattage. The biggest highlight is that the mod is constructed with a 32 bit US Gene Fun Chip from the world’s largest provider of eCig chips. Powered by dual 18650 batteries, it can fire with an output up to 130 watts with atomizers that have a resistance of 0.05ohm and up to 177 watts if the atomizer resistance is 0.10ohm or higher. You can also custom your personal coil cooling value and coefficient of the wire in order to achieve the best vaping. Combined with the latest Uforce T2 tank, it produces strong cloud and unrivaled flavor!
UFORCE T2 Tank Features:
- Resin drip tip
- Stainless steel construction
- Top filling design
- 3.5/5ml e-juice capacity
- The tank is compatible with all of the glass tubes (2ml/3.5ml/5ml/5.5ml/8ml)
- Compatible with all UFORCE coils: P2/U2/U4/U6/U8/N1/N2/N3/R1/D4
- UFORCE P2: Single mesh coil, rich and strong flavor (0.6ohm, 24-28W)
- UFORCE N1: Single mesh coil, well-distributed heating area.(0.13ohm, 50-100W/BEST:70-80W)
- With exotic appearance and exquisite structure, the idea of UFORCE T2 comes from the mechanical design of the TRANSFORMER. Equipped with P2 (U2 instead for TPD), and N1 coils, DRAG mini kit is remarkable for its rich flavors and acceleration power.
- Adjustable bottom airflow control
- 510 threading connection
- 28mm overall diameter
DRAG mini Mod Features:
- Zinc alloy + resin construction
- Power range: 5W-117W
- Temperature range: 100-315’C / 200-600’F
- Resting current: ≤10uA
- Output voltage: 0-7.5V
- Output current: 0-30A
- Resistance range: 0.05ohm-5ohm
- Innovative GENE.FIT chip inside: Apart from the innovation in its brain, GENE.FIT chip is secured by a V0 class fireproofing bridge to block dust, liquid or burnout.
- FIT: Our vision has always been to create the device that is of high performance, long endurance and best protection for vapors. FIT is a mode that can protect tanks to the most with its intelligent matches of FIT 1/2/3.
- Built-in 4400mAh battery: With the equivalent power of dual 18650 batteries, DRAG mini is almost twice as strong in battery life comparing to similar devices.
- Portable and palm-friendly design: For a better portable experience, DRAG mini is compact in structure, ergonomic in shaping and powerful in battery life.
- Aesthetic specular finishing unique resin plates: DRAG mini is employed with solid specular finishing, with multiple resin plates to choose from.
- Max 117W output: With an 117W output to the most, DRAG mini reaches a balance between high power and slim body.
- Seven security protections:
- Switch timeout protection: Intelligent overtime protection will avoid atomizer’s coil and cotton burning.
- Over-temperature protection: TC mode assures the mod and battery work properly within safe temperature range.
- Output over-current protection: To intelligently detect output current, and close the output current when the current exceeds the highest limit.
- Overcharge protection: With dedicated lithium battery protection components, the battery will be protected against battery overcharge and damage.
- Over discharge protection: With dedicated lithium battery protection components, the battery will be protected against battery discharge and harm.
- Short-circuit protection: When the short-circuit is detected, the mod will protect the battery by preventing the circuit returning.
- Support balance charge: With dedicated firmware to detect internal resistance of battery, the battery will be controlled in a steady balanced charging condition.
- OLED screen display
- Micro-USB charging port
- 510 threading connection
- 1 x DRAG Mini
- 1 x UFORCE T2(5ml)
- 1 x UFROCE P2(pre-installed)
- 1 x UFROCE N1
- 1 x Glass Tube(3.5ml)
- 7 x Sealing O-Ring
- 1 x USB Cable
- 1 x GENE Chip Card
- 2 x User Manual
- 1 x Warranty Card